Hot Products
SK-400 400Ton Servo Energy-Saving Injection Molding Machine - China Suppliers and Factory for Quality Plastic Products
Product Introduction
SUCCESSOR SK-400: Large-Scale Manufacturing Power with Unmatched Energy Efficiency
⚡
High-Efficiency Servo Energy-Saving System
Reduces energy consumption by up to 50% compared to conventional models, adjusting power output in real time based on production demands.
🎯
Ultra-Precise Electronic Detection
High-sensitivity sensors and advanced feedback mechanisms guarantee consistent part accuracy of ±0.01mm for even the most complex components.
🔩
High-Capacity Hydraulic System
Reinforced, wear-resistant components withstand extreme pressures, processing thick-walled parts up to 100mm and high-density engineering plastics.
🤖
Automated Production Integration
Seamless compatibility with robotic systems and enterprise-level software, featuring a 15-inch HMI touchscreen with up to 1000 stored production recipes.
🛡️
16-Stage Mold Clamping Management
Fine-tune pressure, speed, and position at every clamping phase, adapting seamlessly to varying part designs and mold configurations.
📡
Predictive Maintenance & Remote Monitoring
AI-driven analytics monitor component wear, predict failures, and recommend maintenance schedules via secure cloud platform access.
Designed exclusively for large-scale, heavy-duty manufacturing scenarios, the SUCCESSOR SK-400 Injection Molding Machine stands as a benchmark of engineering excellence, seamlessly integrating cutting-edge technology with robust, industrial-grade construction to deliver unmatched performance, uncompromising reliability, and long-term operational value. Meticulously engineered to address the most stringent demands of industries requiring high-volume output, complex precision part production, and sustainable cost savings, it has emerged as the premier choice for automotive, heavy industrial, and construction sectors—where every cycle counts, and product consistency directly impacts business success.
💡 Energy Savings: At the core of the SK-400's performance lies its high-efficiency servo energy-saving system, specifically optimized for high-power, continuous-operation scenarios. Unlike traditional hydraulic injection molding machines that waste energy during idle and low-load phases, the SK-400's servo system adjusts power output in real time based on production demands, reducing energy consumption by up to 50% compared to conventional models. This translates to tangible cost savings—lower electricity bills, reduced carbon footprint, and alignment with global sustainable manufacturing standards—without sacrificing an ounce of power or precision.
Complementing this energy efficiency is its ultra-precise electronic detection technology, equipped with high-sensitivity sensors and advanced feedback mechanisms that monitor every critical parameter (including injection pressure, temperature, and mold clamping force) in real time. This constant monitoring enables automatic, microsecond-level adjustments, guaranteeing consistent part accuracy of ±0.01mm—even for the most intricate, complex components with tight tolerances, such as automotive structural parts or industrial precision fittings.
Built to handle the toughest materials and most demanding production tasks, the SK-400 is equipped with a high-capacity hydraulic system featuring reinforced, wear-resistant components—including a heavy-duty cylinder, hardened steel plunger, and high-pressure hoses—that withstand extreme pressures and prolonged use. This robust hydraulic design enables the machine to effortlessly process thick-walled parts (up to 100mm), high-density engineering plastics (such as PA66, PC/ABS, and PEEK), and advanced composite materials (including fiber-reinforced plastics) commonly used in high-stress applications like automotive undercarriage components, industrial machinery housings, and construction hardware.
⚙️ Intelligent Multi-Stage Clamping: What sets the SK-400 apart is its intelligent multi-stage mold clamping parameter management system: with 16 customizable clamping stages, operators can fine-tune pressure, speed, and position at every phase of the clamping process, adapting seamlessly to varying part designs, mold configurations, and production requirements. Whether producing large, one-piece components or small-batch, complex parts, the SK-400 delivers consistent results with minimal setup time.
Engineered for full integration into modern automated production lines, the SK-400 boasts seamless compatibility with robotic systems (including 6-axis robots for part removal, inspection, and packaging) and enterprise-level production line software. Its advanced human-machine interface (HMI) features a 15-inch touchscreen with intuitive, programmable settings, allowing operators to store up to 1000 production recipes for quick recall—ideal for manufacturers with multiple product lines. Beyond on-site control, the machine offers remote monitoring capabilities via a secure cloud platform, enabling plant managers to track production status, check machine performance, and receive real-time alerts from anywhere, at any time. Additionally, its predictive maintenance system uses AI-driven analytics to monitor component wear, predict potential failures, and recommend maintenance schedules—minimizing unplanned downtime, extending machine lifespan, and ensuring continuous production.
🚀 Optimized Cycle Times: Its fast injection speed (up to 500mm/s) and rapid mold opening/closing mechanism reduce cycle times by 15–20% compared to similar models, enabling high-volume production without compromising quality. This efficiency, combined with its precision and durability, makes the SK-400 the perfect solution for large automotive parts (such as bumpers, dashboards, and engine covers), industrial machinery components (gears, brackets, and hydraulic housings), and heavy-duty packaging (large plastic drums, pallets, and industrial containers).
More than just an injection molding machine, the SUCCESSOR SK-400 is a strategic investment in your production capabilities. It combines decades of engineering expertise with the latest technological innovations to deliver a solution that not only meets today's manufacturing demands but also adapts to tomorrow's challenges. With its energy-saving design, precise performance, automated integration, and rugged construction, the SK-400 is the ideal choice for manufacturers seeking to gain a competitive edge—delivering high-quality parts, reducing costs, and maximizing productivity, day in and day out.
Related Industries Field
Machine Specifications
Specifications |
Unit |
SK-360 |
||
INJECTION UNIT |
|
A |
B |
C |
Screw diameter |
mm |
60 |
65 |
70 |
Screw L/D ratio |
L/D |
23 |
22 |
20 |
Theoretical shot volume |
cm3 |
1000 |
1174 |
1362 |
Shot weight (PS) |
g |
910 |
1068 |
1240 |
Injection Rate |
g/s |
320 |
371 |
426 |
Injection pressure |
Bar |
2446 |
2080 |
1794 |
Max. screw speed |
rpm |
154 |
||
CLAMPING UNIT |
|
|
||
Clamping force |
kN |
3600 |
||
Opening stroke |
mm |
670 |
||
Distance between tie-bars |
mm |
730 x 670 |
||
Max. mold height |
mm |
680 |
||
Min. mold height |
mm |
250 |
||
Ejector stroke |
mm |
160 |
||
Ejector force |
kN |
70 |
||
OTHERS |
|
|
||
Max. Pump Pressure |
Mpa |
16 |
||
Servo motor power |
kW |
45 |
||
Heating capacity |
kW |
22.8 |
||
Machine dimensions |
m |
7.2 x 1.9 x 2.35 |
||
Machine weight |
t |
12.5 |
||
Certifications
Company Exhibition
SUCCESSOR SK Series Injection Molding Machines
Where Innovation Meets Performance
Engineered for excellence, the SUCCESSOR SK Series Injection Molding Machine integrates a cutting-edge servo energy-saving system, ultra-precise electronic detection technology, and intelligent multi-stage control of mold clamping pressure, speed, and position. This powerful combination delivers unmatched performance stability, significantly reduced cycle times, and exceptional energy efficiency—propelling your productivity to new heights.
Featuring advanced engineering and innovative design, the SK Series Injection Molding Machine is built to excel in high-demand manufacturing environments. A robust hydraulic system ensures fast, precise operations with superior force and pressure control across injection, clamping, and ejection phases. The result? Consistently high-quality parts, minimized material waste, and maximized uptime.
Perfectly suited for automotive, packaging, consumer goods, and more, the SUCCESSOR SK Series Injection Molding Machine combines versatility with reliability. Its intuitive user interface simplifies operation, while low maintenance requirements enhance long-term cost-effectiveness.
Choose SUCCESSOR SK Series Injection Molding Machine—where precision meets profitability.
Clients Plants Site
Packaging & Shipping
Frequently Asked Questions
Q
What types of materials can the SUCCESSOR SK-400 injection molding machine process?
The SK-400 is designed to handle a wide range of high-performance engineering plastics and composite materials, including PA66, PC/ABS, PEEK, and fiber-reinforced plastics. Its high-capacity hydraulic system and reinforced components allow it to process thick-walled parts (up to 100mm) and high-density materials commonly used in automotive, industrial, and construction applications.
Q
How much energy can the SK-400 save compared to traditional injection molding machines?
The SK-400's high-efficiency servo energy-saving system can reduce energy consumption by up to 50% compared to conventional hydraulic injection molding machines. The servo system adjusts power output in real time based on actual production demands, eliminating energy waste during idle and low-load phases—resulting in significantly lower electricity costs and a reduced carbon footprint.
Q
What level of part accuracy does the SK-400 achieve?
The SK-400 is equipped with ultra-precise electronic detection technology featuring high-sensitivity sensors and advanced feedback mechanisms. It monitors critical parameters—including injection pressure, temperature, and mold clamping force—in real time, enabling microsecond-level automatic adjustments that guarantee consistent part accuracy of ±0.01mm, even for intricate components with tight tolerances.
Q
Can the SK-400 be integrated into an automated production line?
Yes. The SK-400 is engineered for full integration into modern automated production lines. It is compatible with robotic systems—including 6-axis robots for part removal, inspection, and packaging—and enterprise-level production line software. Its 15-inch HMI touchscreen supports up to 1000 stored production recipes, and remote monitoring is available via a secure cloud platform, allowing plant managers to track performance and receive alerts from anywhere.
Q
What industries and applications is the SUCCESSOR SK-400 best suited for?
The SK-400 is the premier choice for automotive, heavy industrial, and construction sectors. Typical applications include large automotive parts (bumpers, dashboards, engine covers), industrial machinery components (gears, brackets, hydraulic housings), and heavy-duty packaging (large plastic drums, pallets, industrial containers). Its combination of power, precision, and efficiency makes it ideal for any high-volume, heavy-duty manufacturing environment.
Q
What are the maintenance requirements for the SK-400, and how is downtime minimized?
The SK-400 features low maintenance requirements thanks to its sealed, self-lubricating components and easy-access service points. Its AI-driven predictive maintenance system continuously monitors component wear, predicts potential failures before they occur, and recommends proactive maintenance schedules—minimizing unplanned downtime and extending machine lifespan. The durable, corrosion-resistant frame also ensures long-term reliability even in harsh industrial environments.