1200 Ton Two-Platen Injection Molding Machine SK-1200U - Top China Suppliers & Factory for Plastic Products
Product Introduction
The Large-Scale Solution: Unmatched Efficiency and Precision for Heavy-Duty Manufacturing
SK-1200U 1200Ton Two-Platen Injection Molding Machine: Your Cost-Effective Gateway to Reliable Medium-to-Large Heavy-Duty Molding
As the entry-level model of the SK-U two-platen series, the SUCCESSOR SK-1200U is purpose-built for small and medium-sized manufacturers stepping into large-component production, delivering an optimal balance of precision, efficiency, and investment value. This machine is tailored for businesses that need consistent performance for mid-sized complex parts, without compromising on production stability or part quality in long-run operations. Its core performance is built on a heavy-duty high-rigidity clamping unit, paired with an L-shaped precision guidance system mounted on a reinforced integral frame, which delivers steady platen movement with a guaranteed ±0.05mm positioning accuracy. This level of precision ensures consistent dimensional conformity for every molded part, even for intricate components with tight tolerance requirements, batch after batch.
To safeguard your mold investment and reduce long-term operating costs, the SK-1200U is equipped with a shock-free synchronous braking system with a built-in buffer structure. This design enables fast and smooth clamping without hard impact, effectively extending the service life of high-value molds and minimizing unplanned maintenance downtime. For production flexibility, the machine features an independent high-pressure cylinder design, which supports controlled slow high-pressure mold opening and simple tie-bar extraction, making it fully adaptable to workshops with low-headroom limitations and diverse production layout needs. The specially treated uniform-stress guide posts deliver over 99% force uniformity across the platen, effectively preventing eccentric load during operation, reducing mechanical wear, and ensuring long-term reliable performance of the whole machine. The reinforced platen structure enhances mold closing stability, while the optimized extended stroke easily accommodates deep-cavity molds, offering a far more cost-effective solution than conventional three-platen machines of the same specification.
To boost production efficiency, the SK-1200U integrates an instantaneous response system paired with high-response dual proportional valves, which delivers rapid and accurate action control, effectively shortening cycle times and increasing single-machine output. The streamlined mechanical design simplifies daily maintenance, and the intelligent automated setup system enables fast and repeatable mold changeovers, minimizing non-productive downtime during production switching. Ideal for manufacturing automotive structural parts, medium-sized industrial equipment housings, and heavy-duty packaging products, the SK-1200U perfectly balances power, precision, and cost efficiency, making it the ideal entry-level workhorse for your large-component molding production.
Core Engineering Highlights
01. Shock-Free Synchronous Braking
A buffered mechanism ensures rapid, reliable clamping with zero impact.
02. Independent High-Pressure Cylinder
Facilitates controlled, slow high-pressure opening and enables easy tie-bar extraction for low-headroom facilities.
03. High-Rigidity Precision Guidance
An L-shaped rail on a robust frame guarantee ±0.05mm accuracy, ensuring rapid and stable platen movement.
04. Durable Guide Posts with Uniform Stress
Specially treated for rigidity and wear/corrosion resistance, these posts achieve over 99% force uniformity to prevent eccentric loading and maximize service life.
01. Exceptional Precision in Mold Opening Position
Achieves a repeatable mold opening accuracy of ±0.2mm—a fivefold improvement over standard three-plate machines. (Verified by internal 1200-ton testing).
02. Ultra-Sensitive Mold Protection
SK-U series machines’ intelligent deceleration control provides unparalleled sensitivity, achieving the "A4 paper rebound" standard. It can stop on the slightest obstruction, ensuring your valuable molds are protected with maximum reliability
03. High-Speed Performance, Lower Cycle Times
Experience significantly faster dry cycles. Our optimized system delivers rapid mold opening and clamping, translating directly into enhanced productivity and greater output. (Verified by 1200-ton internal testing).
Partial product








Machine Specifications
MODEL |
SK-1200U |
||||
Description |
Item |
Unit |
A |
B |
C |
INJECTION UNIT |
Screw Diameter |
MM |
110 |
120 |
130 |
Screw L/D Ratio |
L/D |
24 |
22 |
20.3 |
|
Shot Size (Theoretical) |
CM³ |
5224 |
6600 |
7746 |
|
Injection Weight (PS) |
G |
5046 |
6006 |
7049 |
|
Injection Rate |
G/S |
813 |
968 |
1136 |
|
Plasticizing Capacity |
G/S |
121 |
140 |
161 |
|
Injection Pressure |
MPA |
205 |
172 |
147 |
|
Screw Speed |
RPM |
0 - 110 |
|||
CLAMPING UNIT |
Clamp Tonnage |
KN |
12000 |
||
Space Between Tie Bars |
MM |
1300×1100 |
|||
Opening Stroke |
MM |
1900/1200 |
|||
Max. Mold Height |
MM |
1300 |
|||
Min. Mold Height |
MM |
600 |
|||
Max.daylight |
MM |
2500 |
|||
Ejector Stroke |
MM |
350 |
|||
Ejector Tonnage |
KN |
280 |
|||
Ejector Number |
PCS |
25 |
|||
OTHERS |
Max.・Pump Pressure |
MPA |
17.5/21 |
||
Pump Motor Power |
KW |
48 + 48 + 48 + 13 |
|||
Heater Power |
KW |
74.35 |
|||
Machine Dimension (LxWxH) |
M |
11.5×3.7×3.6 |
|||
Machine Weight |
T |
58 |
|||
Oil Tank Capacity |
L |
1500 |
|||
Certifications









Company Exhibition






Clients plants site









Packaging & Shipping






Frequently Asked Questions (FAQ)
1. What are the key advantages of the SK-1200U two-platen design over traditional three-platen machines?
The SK-1200U offers a significantly smaller footprint, an extended opening stroke ideal for deep-cavity parts, reduced mechanical wear, and over 99% force uniformity across platens to eliminate eccentric loads.
2. How accurate is the mold opening and positioning on this model?
Equipped with an L-shaped precision guidance rail, the clamping unit achieves a guaranteed positioning accuracy of ±0.05mm, alongside a repeatable mold opening accuracy of ±0.2mm.
3. Can the SK-1200U operate in facilities with low ceiling heights?
Yes. The machine features an independent high-pressure cylinder mechanism that allows convenient tie-bar extraction, specifically tailored to accommodate workshops with limited headroom.
4. How does the ultra-sensitive mold protection system function?
It integrates intelligent deceleration control meeting the "A4 paper rebound" standard, which stops the closing motion instantly upon encountering minimal resistance, preventing damage to expensive tooling.
5. What industrial applications is the SK-1200U best suited for?
It is primarily optimized for automotive structural components, medium-to-large home appliance/equipment housings, crates, and heavy-duty logistics and packaging items.
6. What shot capacities and screw options are offered for the SK-1200U?
The machine offers three standard screw variants (A: 110mm, B: 120mm, C: 130mm) providing theoretical shot sizes from 5,224 cm³ up to 7,746 cm³ (approx. 5,046g to 7,049g PS injection weight).